Daniel Fairly Knives

Nakago Carbide Edge Friction Folder

325 USD
Nakago Carbide Edge Friction Folder
Click on image to view full size

Nakago Carbide Edge Friction Folder

325 USD
Nakago No 001!

This ultralight EDC excels as a knife and bottle opener!

This versatile design is equally at home in the field, office, campsite, kitchen, boat or spacecraft. :) It's very pocket friendly with a thick yet discreet deeply contoured clip. Watch/change pocket friendly size! 

Materials Used

.125" Ti Blade with 72 RC Carbide Edge 
.125" Ti Frames
.16" Clip and full length backspacer
Ti Screws
Ti Pivot and Ti Pivot Collar
Ti Stop and Indexing Pins

The only non Ti components are the hardened stainless steel pivot barrel and nylon washers! No need to worry about rust and the knife is virtually maintenance free. 

Weight - 2.5 ounces! 

2.5" Blade
5.8" Total Length 

Chisel Grind with 72 RC Tungsten Carbide Edge - True chisel geometry for aggressive cutting. 

This one has a ton of work put into it including a super clean light orange peel finish, custom made domed Ti stop and indexing pin. Every bit of hardware has a lot of custom work including textured Ti screw heads, textured pivot and collar.  It's the first one and is signed 001 along with my Fairly show side signature. 

6al4v Titanium with 72 RC Tungsten Carbide Edge - excels with abrasive materials such as cardboard, very aggressive with meat, seatbelt material, vegetables, cloth, cord, softer materials, rope, raw bone, paper, etc...

These are easy to sharpen with most any setup, just raise a burr by sharpening the microbeveled side only (reverse of the carbide) then strop or hone the burr off The carbide will not wear off, flake, chip, etc and is an integral part of the knife

USA shipping is included - International shipping is available

This product is out of stock